3.4m Honey Bamboo Universal Cover Top Floating Floor Trim

The Universal Cover Trim is used where your new floating floor joins another floor of the same level or slightly different height. Most often used where timber, bamboo, hybrids or laminate meets existing floor coverings such as stretch carpet, cork, tiles or other existing coverings that are slightly higher or lower than the flooring being installed or as an expansion trim for large area floors.

The Universal Cover trim is designed for use in light commercial and domestic projects. This trim is not designed to be load bearing (trolleys etc.)

To install the Universal Cover Trim, firstly the base plate is glued to the floor and then the correct plastic insert is slotted into the cover trim and then pushed into the base plate to “clamp’ down to the floor, once the flooring is installed. It has a 45mm top cover and is available in 3.4 metre lengths. A base plate and insert is required and must be purchased separately. You can find it in the related products below or by searching "UBP" in the search bar on the website.